Pond Test Kits » Microbe-Lift Test

MICROBE-LIFT AMMONIA TEST STRIPS

Fresh Water Use Water MUST be tested regularly to maintain GOOD WATER QUALITY Allows you to easily Monitor ammonia levels to keep the water quality safe for fish and other aquatic life.

TEST PROCEDURE: 1. Add 2 mls. of water sample to be tested to vial. 2. Dip one MICROBE-LIFT® AMMONIA REAGENTSTIP into the sample for 30 seconds with a gentle, steady up and down motion. 3. Remove and discard the strip. 4. After 3 minutes, using the enclosed color chart card, match vial to closest color. This is a salicylate based test strip which tests well with MICROBE-LIFT® AMMONIA REMOVER. Contains 50 test strips

MICROBE-LIFT CHLORINE / CHLORAMINE TEST STRIPS Fresh Water Use Water MUST be tested regular to maintain GOOD WATER QUALITY Allows you to SAFELY: Use tap water for water changes Top off your pond.

Reduces the potential for TOXICITY due to chlorine or chloramines Free chlorine / total chlorine Contains 50 test strips

MICROBE-LIFT 5 IN 1 TEST STRIPS 5 IN 1 TEST STRIPS

Fresh Water Use Water MUST be tested regularly to maintain GOOD WATER QUALITY Allows you to easily TRACK critical WATER QUALITY parameters with 1 TEST: • Nitrate • Nitrite • Total Hardness • Total Alkalinity • pH

TEST PROCEDURE: 1. Dip one test strip into water for 2 seconds without motion. 2. Remove the strip and shake once, briskly, to remove excess water. Wait 25 seconds. 3. Match pH, Total Alkalinity & Total Hardness (in this order). Match Nitrite and Nitrate colors at 1 minute. Contains 50 test strips

MICROBE-LIFT NITRATE/ NITRITE TEST STRIPS Salt & Fresh Water Use Water MUST be tested regularly to maintain GOOD WATER QUALITY. Helps to determine if POND is CYCLING Helps easily MONITOR fluctuating levels of: • NITRATE which can stimulate unwanted algae growth • NITRITE which can be harmful to fish Nitrate/ Nitrite test strips give you the ability to know when a water change is needed in your aquarium or pond. Nitrite/ Nitrate test strips are fast and easy to use, with no wet or hazardous chemicals.

FRESHWATER: Dip one test strip into water sample for 2 seconds. Remove and hold level, do not shake. Wait 1 minute and match to best color on the color chart. Complete matching within 15 seconds.

SALTWATER: Dip one test strip into the water sample for 2 seconds. Remove and hold level, do not shake. Wait 1 minute and match Nitrite (second pad) to best color on the color chart. At 2 minutes match NITRATE (first pad) to best color on the color chart. Complete all matching within 15 seconds. NITRATE/NITRITE test strips give you an indication of your nitrate/nitrite concentrations which can build up in your aquarium or pond due to uneaten food, waste, bacteria, and oxidation. Nitrate/Nitrite test strips also inform you when the levels have become potentially harmful and a water change is needed. Contains 50 test strips

MICROBE-LIFT PHOSPHATE TEST STRIPS Salt & Fresh Water Use Water MUST be tested regularly to maintain GOOD WATER QUALITY Managing phosphate levels is the most natural way to AVOID ALGAE blooms

The original Single-dip Test Procedure Note: If saltwater appears cloudy match to the closest color spot. Use 1 test strip for freshwater, use 2 test strips for each saltwater test. Contains 50 test strips